USA
Lapp Group
Lapp Brands
 



APPLICATIONS
 
Applications & Industries
Automation Solutions

Lapp Products on the       Factory Floor

 

 

 

 

 

 

 

 

 Lapp Products Providing Automation Solutions
Automation Solutions
 
Automation Solutions
This drawing is intended to be an illustration of where Lapp products may be found in a typical manufacturing facility.
It is not to be be construed as depicting actual applications or product usage.
Molded Servo Assemblies

A-B Motor/Drive Flexing & Static Cable Assemblies
Flexing: These molded pre-assembled and tested cable/connector
assemblies are delivered ready for plug-n-play use. They are ideal for
motor/drive interconnection in high motion applications such as in cable track and multi-axis machines. Molded construction insures a high
quality environmental seal and integral strain relief.

Static: For stationary applications, such as conveyor systems, these cable/connector assemblies are offered with high quality, industrial grade static cable.

DeviceNet Assemblies

DeviceNet™ Flexing & Static Cordsets
Flexing: These pre-tested, molded cordsets utilize high quality continuous flex cable and integral molded strain relief. They are designed to provide interconnection between simple devices, such as sensors and actuators and high level devices, such as PLCs and computers, in high motion
applications.

Static: When continuous flexing is not required, these cordsets offer
long-lasting, reliable performance at a reduced cost.
Remote Access

Remote Access Assemblies
This product line provides quick and easy access to PLCs or industrial
computers mounted inside control panels located on the factory floor. They provide a power outlet and data cable interface to an external operator device, such as a laptop computer, for uploading or downloading system programs and data. All this is accomplished without the need to open the control panel door or shut down the system. Several interconnection protocols are supported (DH 485, Data Highway, Ethernet, etc.).Pre-assembled and tested interface cables are also available.
Populated track
 Populated Track Systems
Lapp provides a custom designed, fully assembled and tested populated track solution that can be ordered with a single part number from a single supplier. Track systems connecting stationary and moving equipment can include motor/drive cables; power, signal, and data cables; and air and fluid hoses. Proper design and construction insures the longest possible service life.
Flexing Ethernet
 Flexing Ethernet Assemblies
Our continuous flex CAT5 cable, combined with either RJ45 or M12
circular connectors, offers a unique solution for motion systems operating in tough industrial environments.
Profibus

Flexing & Static Profibus Assemblies
Flexing: These pre-tested, molded cordsets utilize high quality continuous flex cable and integral molded strain relief. They are designed to provide interconnection between simple devices, such as sensors and actuators and high level devices, such as PLCs and computers, in high motion applications.

Static: When continuous flexing is not required, these cordsets offer
long-lasting, reliable performance at a reduced cost.
Many of the Automation Solutions listed above are available off the shelf for immediate delivery. Our large inventory of cable and connectors means fast delivery even on custom solutions. Call 1-800-774-3539 today to check availability or request a quotation.

Lapp Group
© 2007 Lapp Group
Lapp USA or the Lapp Group are not affiliated with Lapp Insulator.